Add new devices and managing devices

Add new devices and managing devices


3.1            Device list


[Device List] It contains all device information connected to the system. You can perform single, multiple, and grouping management operations on the device.

3.1.1 Parameter settings


Select the specified device in [Device List] and click Parameter settings to configure the parameter information of the device, as shown in the figure below:

3.1.2        Power control

Select the device in [Device list] and click "Shutdown", "Restart", and "Reset" under "Power Control" to remotely shut down, restart, and reset the device.

3.1.3        Body temperature test

Select the device in [Device list], or select the group, and click "Body temperature detection" to set the parameters of temperature detection: temperature detection switch (default on), alarm threshold (default 37.3) and alarm switch, compensation temperature (default + Value 0.3) and mask settings (default off).

3.1.4          Client upgrade

 Select the device in [Device list] and click "More-Client upgrade" to enter the device 

software upgrade page. On this page, you can see the list of uploaded device software. Select the software version of the device to be upgraded and click the upgrade button to complete the device software upgrade operation. It supports online and offline upgrade operation.


3.1.5          Volume settings

1)  General settings: Select the device in the [Device List] and click "More-Volume setting" to set the volume of the selected device. The volume value can be set between 0-100 and the default is 20.

2)    Silent settings: Select the device in [Device list], click "More-Volume setting", and select "Silent mode" in the pop-up tab

3.1.6           Auto-start

 Auto-start: When enabled, the application will start at start-up, and when it is closed, it will not start at start-up. In [Device list], select the devices that need to be set to start automatically, and click the "More-Auto-start" button to enable or disable this function.


3.1.7            Application daemon

Application daemon: When this function is enabled, the application will automatically jump back to the playback interface within 1 minute after exiting the application page. When it is disabled, it will not automatically jump back. In [Device list], select the devices that need to set application daemon, and click the "More-Application daemon" button to enable or disable this function.

3.1.8 Open the door remotely

After corresponding to the device records in [Device list], click the "Open the door remotely" button to open the corresponding gate.

3.1.9     Delete

 Select the device to be deleted in the [Device list] and click the "Delete" button to complete the delete operation. Only offline devices are supported. It supports single or multiple device operations.

3.1.10 Move Group

In [Device list], select the devices that require mobile grouping, and click "Mobile Grouping". In the pop-up window, select the target group you want to move to, and you can complete the group move operation after you confirm it. It supports single or multiple device operations.


3.1.11 Personalize list

The information displayed in the list can be selected as needed in the Personalize list

3.1.12   Device details

The device details include basic information, device settings, and remote operations. 

  Basic information: View device information, edit device name, device address, etc.

·   Device information: You can view and modify device parameter information, display settings, and other settings.

Device operation: restart, shutdown, reset, and remote door opening.

3.1.13  Device monitoring

 Device monitoring includes two parts: real-time monitoring and log monitoring.

 Real-time monitoring: You can view the device name and online status, and load and display the current screen of the device. You can also restart and shut down

·   Log monitoring: View related operation logs of the device.

3.1.14 Grouping operation in Bulk

 Batch operations can be performed in the device group by selecting the device group. It supports parameter setting, shutdown, restart, reset, client upgrade, volume setting, auto start and application daemon for the entire device group, as shown below:

If there is no device under the selected group, a prompt will pop up: there is no device under the selected group, please select again. If there are devices under the selected group, the original settings will be overwritten after the batch setting is prompted.

3.1.15       Device grouping management

Device grouping uses structure grouping by default. Each user group has a default device group. You can add, modify, and delete device groups on the user group. The operation is similar to the user grouping in [Group structure].

3.2   APK list

[APK list] The page contains client software list information and software version upload and delete operations.

3.2.1 Delete APK

Select the software version to be deleted in the APK list and click 

3.2.2 New APK

Click    to open the [Version Upload] page

    • Related Articles

    • Setting up new employee and personnel information

      4.1      Employee list   The employee list is used to manage employee information, such as viewing, adding, editing, and exporting employee information. Employee information can be added individually or in bulk. The batch adding operation requires ...
    • Using attendance management

      7.0            Attendance rules   [Attendance rules] Add, modify and delete related rules including shifts, holidays, public holidays, and device groups, etc. are set in this module.   7.1.1         Shift settings   The shift setting contains a ...
    • Using the system management options.

      6.1            Group structure [Group structure] The module is used to manage the group structure and enterprise user information management in the enterprise. The hierarchical relationship is created and managed by admin or enterprise administrator ...
    • Using the console or central management software

      Console It provides an overview of the number of devices and online status; statistics on the face scan (total face scan, employee face scan, visitor face scan, stranger's face scan); today's Access and real-time monitoring (employees, visitors, ...
    • Setting up access management and permissions

      5.1        Access Management records   View all the identification records on the device, which can be grouped and filtered by device. The data body temperature value is greater than or equal to 37.3 degrees to display red font, less than 37.3 ...